Sonos App Update

[sailesh26]

I have updated my sonos app and lost basic control on my demopad, has anyone experienced this? any thoughts?
thanks

[member_258]

yep something has changed in Sonos 9.0 with regards to the http SOAP commands. affecting jobs we've done and same for my house.

Can still control Sonos through DeviceSpy UPNP commands so 9.0 hasn't locked out all 3rd party access.

Currently trying to capture and analyse commands in wireshark to see what's changed. If I can get a new command set working I will post here

[Chris Shead]

I will be interested if you can get DemoPad to talk to Sonos again, have a very upset Client.

[member_258]

got it working...new codes on their way shortly.

format of SOAP commands changed slightly (first time that has happened with Sonos update).

[member_258]

Updated sonos commands. Still port 1400. Sonos seems to insist on IP address of target ZP now in each command, so make sure you update them per device.

Let me know if questions or if additional commands needed

[DemoPad]

Excellent work - note in place of the IP address, you can use [#HOST] if using the CentroControl app to directly control it, equally you can use [#CONTENTLENGTH] instead of the actual value, example command for play:

POST /MediaRenderer/AVTransport/Control HTTP/1.1\x0D\x0AHOST: [#HOST]:1400\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:AVTransport:1#Play"\x0D\x0ACONTENT-TYPE: text/xml; charset="utf-8"\x0D\x0AContent-Length: [#CONTENTLENGTH]\x0D\x0A\x0D\x0A<?xml version="1.0" encoding="utf-8"?>\x0D\x0A<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">\x0D\x0A <s:Body>\x0D\x0A <u:Play xmlns:u="urn:schemas-upnp-org:service:AVTransport:1">\x0D\x0A <InstanceID>0</InstanceID>\x0D\x0A <Speed>1</Speed>\x0D\x0A </u:Play>\x0D\x0A </s:Body>\x0D\x0A</s:Envelope>

[Chris Shead]

Updated sonos commands. Still port 1400. Sonos seems to insist on IP address of target ZP now in each command, so make sure you update them per device.

Let me know if questions or if additional commands needed

Hi, Great job. Please could you add the "GetVolume" command, below is the normal command that we had, but my brain is not sure what changes are needed to be made, and i do not have a Sonos in the office to check.

Old Command:


POST /MediaRenderer/RenderingControl/Control HTTP/1.1\x0D\x0ACONNECTION: close HOST:1400\x0D\x0ACONTENT-LENGTH: [#CONTENTLENGTH]\x0D\x0ACONTENT-TYPE: text/xml; charset="utf-8"\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:AVTransport:1#GetVolume"\x0D\x0A\x0D\x0A<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encodin ... :GetVolume xmlns:u="urn:schemas-upnp-org:service:RenderingControl:1"><InstanceID>0</InstanceID><Channel>Master</Channel></u:GetVolume></s:Body></s:Envelope>


Thanks in Advance

Chris

[member_258]

Sorry for delay Chris. New GetVolume command is (change your IP after HOST):

POST /MediaRenderer/RenderingControl/Control HTTP/1.1\x0D\x0AHOST: 192.168.4.62:1400\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:RenderingControl:1#GetVolume"\x0D\x0ACONTENT-TYPE: text/xml; charset="utf-8"\x0D\x0AContent-Length: 380\x0D\x0A\x0D\x0A<?xml version="1.0" encoding="utf-8"?>\x0D\x0A<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">\x0D\x0A <s:Body>\x0D\x0A <u:GetVolume xmlns:u="urn:schemas-upnp-org:service:RenderingControl:1">\x0D\x0A <InstanceID>0</InstanceID>\x0D\x0A <Channel>Master</Channel>\x0D\x0A </u:GetVolume>\x0D\x0A </s:Body>\x0D\x0A</s:Envelope>

[hengenl]

That's great news as I was using the feedback for my Sonos device before

[tvlicini]

Hello,

Do you hvae a list with all the SONOS command for demopad ?

My Play or STOP command work fine but what is the command for set the volume at 50% or 30%... ?

Regards

[tvlicini]

Hi,

How can we load a radio ?

The old command was :

Code: Select all

POST /MediaRenderer/AVTransport/Control HTTP/1.1\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:AVTransport:1#SetAVTransportURI"\x0D\x0ACONTENT-TYPE: text/xml ; charset="utf-8"\x0D\x0AHOST: 1400\x0D\x0AContent-Length: 464\x0D\x0A\x0D\x0A<?xml version="1.0" encoding="utf-8"?>\x0D\x0A<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">\x0D\x0A   <s:Body>\x0D\x0A      <u:SetAVTransportURI xmlns:u="urn:schemas-upnp-org:service:AVTransport:1">\x0D\x0A         <InstanceID>0</InstanceID>\x0D\x0A         <CurrentURI>x-rincon-mp3radio://rougefm.ice.infomaniak.ch/rougefm-high.mp3</CurrentURI>\x0D\x0A         <CurrentURIMetaData />\x0D\x0A      </u:SetAVTransportURI>\x0D\x0A   </s:Body>\x0D\x0A</s:Envelope>  \x0D\x0A

RESOLVED : I found out alone, for information the new command is :

Code: Select all

POST /MediaRenderer/AVTransport/Control HTTP/1.1\x0D\x0AHOST: [#HOST]:1400\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:AVTransport:1#SetAVTransportURI"\x0D\x0ACONTENT-TYPE: text/xml; charset="utf-8"\x0D\x0AContent-Length: 464\x0D\x0A\x0D\x0A<?xml version="1.0" encoding="utf-8"?>\x0D\x0A<s:Envelope s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">\x0D\x0A   <s:Body>\x0D\x0A      <u:SetAVTransportURI xmlns:u="urn:schemas-upnp-org:service:AVTransport:1">\x0D\x0A         <InstanceID>0</InstanceID>\x0D\x0A         <CurrentURI>x-rincon-mp3radio://http://rougefm.ice.infomaniak.ch/rougefm-high.mp3</CurrentURI>\x0D\x0A         <CurrentURIMetaData />\x0D\x0A      </u:SetAVTransportURI>\x0D\x0A   </s:Body>\x0D\x0A</s:Envelope>

You need just to change the URL : rougefm.ice.infomaniak.ch/rougefm-high.mp3 with other radio

[mvppsu]

Can someone help with this one. I can't seem to get it to work.

Get Info:

OLD COMMAND

POST /MediaRenderer/AVTransport/Control HTTP/1.1\x0D\x0ACONNECTION: close HOST:1400\x0D\x0ACONTENT-LENGTH: 272\x0D\x0ACONTENT-TYPE: text/xml; charset="utf-8"\x0D\x0ASOAPACTION: "urn:schemas-upnp-org:service:AVTransport:1#GetPositionInfo"\x0D\x0A\x0D\x0A<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encodin ... sitionInfo xmlns:u="urn:schemas-upnp-org:service:AVTransport:1"><InstanceID>0</InstanceID></u:GetPositionInfo></s:Body></s:Envelope>\x0D\x0A

[mvppsu]

Never mind. I decided to switch over to the SONOS HTTP API as provided here https://github.com/jishi/node-sonos-http-api This makes interfacing with SONOS much easier.