Hi guys,
I'm having major issues uploading my remote to my iPad mini, this has only occurred in the last 2 nights. It keeps saying there is a network error but both my iPad and laptop are on the same network and I've tried a wired connection but still has the same problem.
Is there something I'm missing?
Device upload problem
-
member_258
- Posts: 7
- Joined: Mon Jul 16, 2012 3:36 pm
Re: Device upload problem
Have seen intermittent issues with this. Restart PC, kill Dpad on iPad. Close all apps on ipad. Restart ipad
The try again. If no luck, connect PC with ethernet (not wifi) and try upload again (PC IP address will change so update in dpad project settings)
Havent been able to pin this down but usuaully a round of restarts solves it
The try again. If no luck, connect PC with ethernet (not wifi) and try upload again (PC IP address will change so update in dpad project settings)
Havent been able to pin this down but usuaully a round of restarts solves it
-
Idealhomes
- Posts: 144
- Joined: Mon Jul 16, 2012 3:35 pm
- Location: New Zealand
- Contact:
Re: Device upload problem
Another thing to double check is the Project File Name:, make sure there is no spaces in the .Pad file and the .Pad file and Project File Name are exactly the same.
Pretty well just double check the Project Location and File Name are the same in the App settings.
Good luck
Pretty well just double check the Project Location and File Name are the same in the App settings.
Good luck
"Setting the Standard in Quality and Commitment"